Rockville (2) ASM4 4″ Studio Monitors Computer Speakers w/Bluetooth+Stands+Pads

Product Description

(2) Rockville ASM4 4″ Studio Monitors Computer Speakers w/Bluetooth+Stands+Pads

What’s in the Box:

Power Cable3.5mm to dual RCA cableSpeaker cableOwner’s Manual(2) Near-Field Monitor Stands

Description of ASM4:

The Rockville ASM4 Active Studio Monitors were designed and engineered to be your go-to speakers for studio monitoring and entertainment. This is tuned to give a flat and balanced frequency response which also makes it the perfect computer speakers.

This speaker system provides full range monitoring accuracy with good bass down to 50Hz.

This speaker was DSP tuned by the Rockville development team. We compared it to the top studio monitors on the market and we made sure that we out-perform anything in our cost range.

The Neodymium silk dome tweeters give smooth highs while our efficient woofer and rear bass port provide clear mids and lows.

We added Bluetooth playback so you can use these for entertainment in addition to studio monitoring. We also added an optical input so you can connect these to your TV or other digital source. The left and right ¼” TS jacks will allow you to connect any pro audio source such as a mixer, interface, etc.

Features of ASM4:

Rockville ASM4 4″ 2-Way 200 Watt Active/Powered Pair of Studio Monitor Speakers with Bluetooth200w Peak output / 50 Watts RMS4″ Woofer with efficient paper cone and rubber surround1″ Silk dome tweeter½” MDF enclosure with rear firing port for enhanced low frequenciesDSP tuned with a flat and balanced frequency responseBuilt in Bluetooth playback with 35 foot rangeOptical input to connect to your TV or other digital sourceLeft and Right ¼” TS input for any pro audio sources (mixer, interface, etc)RCA aux input3.5MM aux inputBluetooth version 5.0Full Range Class D Amplifier CircuitryLED Power on IndicatorRotary Front Volume ControlCurved Front Bezel Design Eliminates Standing Wave Distortion

Specifications of ASM4:

Frequency Response: 50Hz – 20 kHzTotal Speaker Power Output: 50 Watts RMS / 200 Watts PEAKInput Impedance (Ohms): 10 K Ohm BalancedAC Power Input: 110/240 auto-switchingCabinet Finish: BlackDimensions of each speaker (H x W x D): 10.35″ (263mm) x 5.91″ (150mm) x 8.86″ (225mm)Weight of the pair of speakers: 12.6 lbs. (5.7kg)

Description of RVSM1:

These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel.

Features of RVSM1:

Studio Monitor Stands (Pair)Adjustable HeightSteel ConstructionNylon clutch for adjustingEVA Pad on top to eliminate unwanted vibrationsTriple enforced steel base with ultimate sturdinessBlack ColorWeight capacity: 80 lbs.Adjustable height Range: 33-45 inchesBase: 17.7 x 17.7 x 17.7 inchesTop Plate: 9.05 x 9.45 inchesTube Diameter: 1.5 inch- 1.37 inch

Description of RRS190S:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5″ by 9.5″ and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!

Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency.” The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors! Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”. Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

Easiest and affordable way to improve your studio monitors soundDecouples your studio monitors from desktops and monitor stands for accurate reproductionEach package contains 2 Isolation Pads – enough for 2 studio monitors2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degreesSupports up to 100 lbs., so they can isolate a variety of studio gearHandsome charcoal gray color

Decouple your monitors for super-accurate sound

What Rockville Isolation Pads do is called “decoupling.” When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they’re sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors

Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning. The most affordable way to improve the sound of your studio monitors

Features of RRS190S:

Rockville RRS190S: Monitor Isolation Pads3 Angle High Density Foam7.5″ x 9.5″High quality, High Density FoamEliminates vibrations and unwanted noises in your studioPrice is for (2) pads which accommodates (2) speakers

Package Includes: (1) Pair Rockville ASM4 4″ Pro Studio Monitor Computer Speakers w/Bluetooth+Optical, (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height, (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5″ x 9.5″/3 Angles
Features of ASM4: Rockville ASM4 4″ 2-Way 200 Watt Active/Powered Pair of Studio Monitor Speakers with Bluetooth, 200w Peak output / 50 Watts RMS, 4″ Woofer with efficient paper cone and rubber surround, 1″ Silk dome tweeter, ½” MDF enclosure with rear firing port for enhanced low frequencies, DSP tuned with a flat and balanced frequency response, Built in Bluetooth playback with 35 foot range, Optical input to connect to your TV or other digital source,
Left and Right ¼” TS input for any pro audio sources (mixer, interface, etc), RCA aux input, 3.5MM aux input, Bluetooth version 5.0, Full Range Class D Amplifier Circuitry, LED Power on Indicator, Rotary Front Volume Control, Curved Front Bezel Design Eliminates Standing Wave Distortion, Specifications of ASM4: Frequency Response: 50Hz – 20 kHz, Total Speaker Power Output: 50 Watts RMS / 200 Watts PEAK, Input Impedance (Ohms): 10 K Ohm Balanced, AC Power Input: 110/240 auto-switching
Features of RVSM1: Studio Monitor Stands (Pair), Adjustable Height, Steel Construction, Nylon clutch for adjusting, EVA Pad on top to eliminate unwanted vibrations, Triple enforced steel base with ultimate sturdiness, Black Color, Weight capacity: 80 lbs. Adjustable height Range: 33-45 inches, Base: 17.7 x 17.7 x 17.7 inches, Top Plate: 9.05 x 9.45 inches, Tube Diameter: 1.5 inch- 1.37 inch
Features of RRS190S: Rockville RRS190S: Monitor Isolation Pads, 3 Angle High Density Foam, 7.5″ x 9.5″, High quality, High Density Foam, Eliminates vibrations and unwanted noises in your studio, Price is for (2) pads which accommodates (2) speakers