Fomito V-Mount V-Lock Battery Plate Power Adapter with 15mm Rod Clamp for Sony a3000 a5000 a6000 a6500 a7R a7S RX10 III NEX-3N Camera Camcorder

Product Description

Note: Most of Power Adapter Cables for Camcorders, DSLR Cameras, LED lights, Microphones, Field Monitors, etc can be found in our store.

14.8V DC D-Tap for Blackmagic Design Pocket Cinema Camera 4K/6K, Camcorders, 14.8v LED lights, 14.8v Field Monitors, etc.15V output voltage for Blackmagic Design Pocket Cinema Camera 4K/6K, Camcorders, 15v LED lights, 15v Field Monitors, etc.12V output voltage applies to 12v Field Monitors, 12v LED lights, etc.8V output voltage for DSLR Cameras Canon EOS 5DS, 5DS R, 5D Mark II, 5D Mark III, 5D Mark IV, 60D, 60Da, 6D, 70D, 7D, 7D Mark II, 80D,EOS R, for Nikon D3100 D3200 D3300 D5200 D5300, for Nikon D800 D800E D600 D610 D750 D7200, for Sony A7III A7RIII A9 A9S, for Sony A7 A7R A7S A7M A7II A7S2 A7M2 A7R2 A6500 A6400 A6300 A6100 A6000 A5100 A5000 A3000 NEX5 NEX7 DSC-RX10.5V and USB output port applies to the recorder 5v, H4N microphone 5v, frequency divider 5v, cell phone ect.

Compatibility:

Blackmagic Design Pocket Cinema Camera 4K/6K with Dtap-BMPCC power adapter cable

Includes 4x DC to DC cables and 1x FW-50 Dummy Battery Adapter to DC power cable

1 x FW-50 DC Dummy Battery Power Adapter1 x 5.5 * 2.5mm DC to DC Spring Cable1 x DC5.5 * 2.5mm Right Angle to DC4.0 * 1.7mm Right Angle Cable1 x DC5.5 * 2.5mm Right Angle to DC5.5 * 2.5mm Right Angle Cable1 x DC5.5 * 2.5mm Right Angle to DC5.5 * 2.5mm Straight Cable

Specifications

Low static power comsumption; low temperature coefficient; high conversion efficiency.Over output protection circuit; automatic lock protection.

The power supply device can extend multiple output interfaces for devices that require multiple input power supplies.

14.8V output for Large Cameras5V output for Mobile Phone / iPad, etc .8V output for Camera / LED Light / Monitors12V output for LED Light / Monitors15V output suitable for photographic equipment for voltage input requirements
Note: V-mount plate with anti-misconnection power function, different voltage DC power cable can only access the corresponding interface end, will effectively protect your equipment.

Installation

Installed on the 15mm rods, fixed by screwing on both sides. The V-mount power plate can be mounted in any direction according to your needs.

Main interface

Better electrical conductivity, Prevent short circuit from falling off.

FW-50 DC Dummy Power Adapter

Input: DC 8VUsed for Sony Cameras: A7 / A7R / A7S / A7M / A7II / A7S2 / A7M2 / A7R2 / A6500 / A6400 / A6300 / A6100 / A6000 / A5100 / A5000 / A3000 / NEX5 / NEX7 / DSC-RX10

Smart and wide applications power output systems with v-lock plate, working with V-mount battery can power up camcorder, DSLR camera, field monitor, led light, camera flash, mobile phone.
Using with DC5.5*2.5mm port to FW50 Dummy Battery works for Sony A7 A7II A7R A7RII A7S A7S2 A7M A7M2 A6500.
The V lock battery plate features a 15 VDC barrel output, an 8 VDC barrel output, a 12 VDC barrel outputs, a 5 VDC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off.
15mm Rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. V-Lock Mount which access the quick release the battery attachments.
Using D-tap/DC/USB to DC cables (Optional) supplies power to monitor or led light. Using D-tap/DC/USB to dummy battery adapter cables (Optional) works for DSLR cameras or camcorders. You can purchase separately these adapter cords in my shop. (Note: please choose the correct connecting adapter cords with the same as interface voltage of the V mount plate)